What do all the ports do on the Moku:Lab?
Written by Paul Cracknell
Updated at August 6th, 2024
-
Moku:Go
Moku:Go Arbitrary Waveform Generator Moku:Go Data Logger Moku:Go Frequency Response Analyzer Moku:Go Logic Analyzer & Pattern Generator Moku:Go Oscilloscope & Voltmeter Moku:Go PID Controller Moku:Go Spectrum Analyzer Moku:Go Waveform Generator Moku:Go Power Supplies Moku:Go Digital Filter Box Moku:Go FIR Filter Builder Moku:Go Lock-in Amplifier Moku:Go General Moku:Go Logic Analyzer/Pattern Generator Moku:Go Time & Frequency Analyzer Moku:Go Laser Lock Box Moku:Go Phasemeter
-
Moku:Lab
Moku:Lab General Moku:Lab Arbitrary Waveform Generator Moku:Lab Data Logger Moku:Lab Digital Filter Box Moku:Lab FIR Filter Builder Moku:Lab Frequency Response Analyzer Moku:Lab Laser Lock Box Moku:Lab Lock-in Amplifier Moku:Lab Oscilloscope Moku:Lab Phasemeter Moku:Lab PID Controller Moku:Lab Spectrum Analyzer Moku:Lab Waveform Generator Moku:Lab Time & Frequency Analyzer Moku:Lab Logic Analyzer/Pattern Generator
-
Moku:Pro
Moku:Pro Arbitrary Waveform Generator Moku:Pro Data Logger Moku:Pro Frequency Response Analyzer Moku:Pro Oscilloscope Moku:Pro PID Controller Moku:Pro Spectrum Analyzer Moku:Pro Waveform Generator Moku:Pro Lock-in Amplifier Moku:Pro Digital Filter Box Moku:Pro FIR Filter Builder Moku:Pro Phasemeter Moku:Pro Multi-instrument Mode Moku:Pro General Moku:Pro Logic Analyzer/Pattern Generator Moku:Pro Time & Frequency Analyzer
- Python API
- MATLAB API
- Arbitrary Waveform Generator
- Data Logger
- Digital Filter Box
- FIR Filter Builder
- Frequency Response Analyzer
- Laser Lock Box
- Lock-in Amplifier
- Oscilloscope
- Phasemeter
- PID Controller
- Spectrum Analyzer
- Time & Frequency Analyzer
- Waveform Generator
- Logic Analyzer & Pattern Generator
- Multi Instrument Mode
- Moku Cloud Compile
- Moku general
- LabVIEW
Moku:Lab; front and rear panel; ports and interfaces
Moku:Lab front side layout:
From left to right:
- Two analog inputs (BNC): signal input channels
- Power button / status LED: powers on or off the Moku:Lab, indicating the status of the Moku:Lab (for more information, check out how to turn on the Moku:Lab here and find out more on the status LED here)
- Two analog outputs (BNC port): signal output channels
Moku:Lab rear panel layout:
From left to right:
- DC power: power supply for Moku:Lab.
- SD card slot: data logging on to the SD card.
- Micro-USB data port: enables Moku:Lab connection to PC via USB cable.
- Ethernet port: enables Moku:Lab connection to a router or network switch via Ethernet cable.
- USB charge port: charging port for other devices, e.g. iPad. This port does not support data transmission.
- External trigger input (BNC): enables Moku:Lab to trigger off external signal.
- 10 MHz ref. output: reference clock output (can be used to synchronize multiple Moku:Labs)
- 10 MHz ref. input: reference clock input (can be used to synchronize multiple Moku:Labs)
- Kensington Lock slot