How to connect my Moku to a WiFi network for the first time
Written by Paul Cracknell
Updated at August 27th, 2024
-
Moku:Go
Moku:Go Arbitrary Waveform Generator Moku:Go Data Logger Moku:Go Frequency Response Analyzer Moku:Go Logic Analyzer & Pattern Generator Moku:Go Oscilloscope & Voltmeter Moku:Go PID Controller Moku:Go Spectrum Analyzer Moku:Go Waveform Generator Moku:Go Power Supplies Moku:Go Digital Filter Box Moku:Go FIR Filter Builder Moku:Go Lock-in Amplifier Moku:Go General Moku:Go Logic Analyzer/Pattern Generator Moku:Go Time & Frequency Analyzer Moku:Go Laser Lock Box Moku:Go Phasemeter
-
Moku:Lab
Moku:Lab General Moku:Lab Arbitrary Waveform Generator Moku:Lab Data Logger Moku:Lab Digital Filter Box Moku:Lab FIR Filter Builder Moku:Lab Frequency Response Analyzer Moku:Lab Laser Lock Box Moku:Lab Lock-in Amplifier Moku:Lab Oscilloscope Moku:Lab Phasemeter Moku:Lab PID Controller Moku:Lab Spectrum Analyzer Moku:Lab Waveform Generator Moku:Lab Time & Frequency Analyzer Moku:Lab Logic Analyzer/Pattern Generator
-
Moku:Pro
Moku:Pro Arbitrary Waveform Generator Moku:Pro Data Logger Moku:Pro Frequency Response Analyzer Moku:Pro Oscilloscope Moku:Pro PID Controller Moku:Pro Spectrum Analyzer Moku:Pro Waveform Generator Moku:Pro Lock-in Amplifier Moku:Pro Digital Filter Box Moku:Pro FIR Filter Builder Moku:Pro Phasemeter Moku:Pro Multi-instrument Mode Moku:Pro General Moku:Pro Logic Analyzer/Pattern Generator Moku:Pro Time & Frequency Analyzer
- Python API
- MATLAB API
- Arbitrary Waveform Generator
- Data Logger
- Digital Filter Box
- FIR Filter Builder
- Frequency Response Analyzer
- Laser Lock Box
- Lock-in Amplifier
- Oscilloscope
- Phasemeter
- PID Controller
- Spectrum Analyzer
- Time & Frequency Analyzer
- Waveform Generator
- Logic Analyzer & Pattern Generator
- Multi Instrument Mode
- Moku Cloud Compile
- Moku general
- LabVIEW
Initial set up of Moku WiFi connection
When your Moku is powered on for the first time, it will be in its factory default state, broadcasting a Wireless Access Point with both USB and Ethernet enabled. (Moku:Go M0 and M1 models don't have an Ethernet port.)
To start configuring your Moku, you can either connect to its Access Point or use a USB cable.
The screenshot in this guide was taken using the Moku Windows app, but the steps are applicable to macOS and iPad as well.
Join Moku's Wireless Access Point network
- The instructions of connecting to Moku's Access Point can be found here.
- Launch the Moku App, right-click the Moku device icon on the "Select your device" screen and click “Configure device”.
- Navigate to the WiFi tab and check "Join a WiFi network" to enable the WiFi connection. Enter the details of the WiFi network which you wish the Moku to join. You will be prompted to enter a password for that network if required.
- Next, connect your computer to the same WiFi network. Relaunch the Moku App, which will search for Moku hardware on the network. Your Moku device should now appear, connected to the same WiFi network.