Example MATLAB script to implement a plotting Frequency Response Analyzer
%% Plotting Frequency Response Example
%
% This example demonstrates how you can generate output sweeps using the
% Frequency Response Analyzer instrument, and view transfer function data in real-time.
%
% (c) 2017 Liquid Instruments Pty. Ltd.
%
%% Connect to your Moku
ip = input('Please enter your Moku:Lab IP address: ', 's');
% Connect to your Moku and deploy the desired instrument
m = MokuFrequencyResponseAnalyzer(ip);
%% Configure the instrument
% Set output sweep amplitudes
m.set_output(1,0.5); % Channel 1, 0.5Vpp
m.set_output(2,0.5); % Channel 2, 0.5Vpp
% Set output sweep configuration
% 1MHz - 100MHz, 512 sweep points
% Logarithmic sweep ON
% 1msec averaging time, 1msec settling time
% 1 averaging cycle, 1 settling cycle
m.set_sweep('f_start', 1e6, 'f_end', 100e6, 'sweep_points', 512, ...
'sweep_log', 'true', 'averaging_time', 1e-3, 'settling_time', 1e-3, ...
'averaging_cycles', 1, 'settling_cycles', 1);
% Start continuous sweeping (single sweep OFF)
m.start_sweep('single','false');
%% Set up plots
% Get initial data to set up plots
data = m.get_data();
% Set up the plots
figure;
magnitude_graph = subplot(2,1,1);
ms = semilogx(magnitude_graph, data.frequency,data.ch1.magnitude_dB, data.frequency, data.ch2.magnitude_dB);
xlabel(magnitude_graph,'Frequency (Hz)');
ylabel(magnitude_graph,'Magnitude (dB)');
phase_graph = subplot(2,1,2);
ps = semilogx(phase_graph, data.frequency, data.ch1.phase, data.frequency, data.ch2.phase);
xlabel(phase_graph,'Frequency (Hz)');
ylabel(phase_graph,'Phase (cyc)');
%% Receive and plot new data frames
while 1
data = m.get_data();
set(ms(1),'XData',data.frequency,'YData',data.ch1.magnitude_dB);
set(ms(2),'XData',data.frequency,'YData',data.ch2.magnitude_dB);
set(ps(1),'XData',data.frequency,'YData',data.ch1.phase);
set(ps(2),'XData',data.frequency,'YData',data.ch2.phase);
axis(magnitude_graph,'tight');
axis(phase_graph,'tight');
pause(0.1);
end