Factory Resetting Moku:Go
Restore Moku:Go to its default settings
You can return your Moku:Go to its default network and configuration settings by pressing the Factory Reset button in the the bottom of the device.
This process is as follows:
Steps
- Connect your Moku device to its power supply.
- Using a paperclip, press the reset button on the bottom of your Moku:Go for 3 seconds. The status LED light should go from green to orange. Be careful to make sure the power connector is not disconnected until the status LED turns off.
- Once the LED is off, disconnect and reconnect the power supply. Your Moku device should go through the booting procedure and after a few minutes the green LED should appear.