Can I deploy more than one instrument on the same Moku:Lab device?
Written by Paul Cracknell
Updated at December 22nd, 2020
-
Moku:Go
Moku:Go Arbitrary Waveform Generator Moku:Go Data Logger Moku:Go Frequency Response Analyzer Moku:Go Logic Analyzer & Pattern Generator Moku:Go Oscilloscope & Voltmeter Moku:Go PID Controller Moku:Go Spectrum Analyzer Moku:Go Waveform Generator Moku:Go Power Supplies Moku:Go Digital Filter Box Moku:Go FIR Filter Builder Moku:Go Lock-in Amplifier
- Moku:Lab
- Moku:Pro
Sequential instrument deployment in MATLAB
You can run multiple instruments with the same Moku:Lab in sequence, but it is not possible to do so at the same time.
To deploy a new instrument, simply connect to the Moku:Lab with a new instrument:
%% Sequential Instrument Deploy Example
%
% This example demonstrates how you can deploy the Oscilloscope instrument followed
% by the Frequency Response Analyzer instrument
%
% (c) 2020 Liquid Instruments Pty. Ltd.
%
%% Connect to your Moku
ip = input('Please enter your Moku:Lab IP address: ', 's');
% Connect to your Moku and deploy the Oscilloscope instrument
m1 = MokuOscilloscope(ip);
%% Perform tasks with the Oscilloscope
% Connect to your Moku and deploy the Frequency Response Analyser instrument
m2 = MokuFrequencyResponseAnalyzer(ip);
%% Perform tasks with the Frequency Response AnalyzerNote: once the Frequency Response Analyzer instrument is deployed, Moku:Lab will not be running the Oscilloscope instrument any more. If you need to access the Oscilloscope again, you will need to deploy the Oscilloscope again.